User Manual

Air Compressor Bracket

Installation for 854F-E34T Engines

Illustration 94 g03237745

Typical example

Air compressor bracket is supplied with two dowels

(1) installed.

Two more dowels are supplied which can be used to

align air compressor to the bracket.

The air compressor is supplied by the OEM.

Note: The two dowels (3) on the rear of the bracket

(2) must not be removed to ensure alignment to front

left corner of the cylinder head.

Power Take-Off Drive for 854F-E34T

Engines

There are two options to install driven equipment to

the power take-off drive. The first option installs the

driven equipment to the power take-off drive on the

engine. The second option requires the power take-

off drive to be removed. The driven equipment is then

installed on the power take-off drive. The power take-

off drive is then installed on the engine.

Installation of Driven Equipment to the

Power Take-Off Drive Without the

Removal of the Power Take-Off Drive

from the Engine

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

NOTICE

Care must be taken to ensure that fluids are con-

tained during performance of inspection, mainte-

nance, testing, adjusting and repair of the product. Be

prepared to collect the fluid with suitable containers

before opening any compartment or disassembling

any component containing fluids.

Dispose of all fluids according to local regulations and

mandates.

Illustration 95 g03238156

Typical example

This document has been printed from SPI2. NOT FOR RESALE