Manualshelf

User Manual

ManualsBrandsPerkins Engine ManualsOtherPerkins Engine 1206F-E70TA, 1206F-E70TTA, 1204F-E44TA, 1204F-E44TTA, and 854F-E34T Customer Assembly
31323334353637383940
36
Clean Emission Module (CEM) of DOC and SCR
Illustration 75 g03417158
Typical example
There are two sizes of CEM that can be installed. A
high powered CEM and a low powered CEM. The
approximate weight of the high powered CEM is
47 kg (104 lb). The approximate weight of the low
powered CEM is 42 kg (93 lb).
Two suitable double looped slings are required to lift
the CEM. Also, a suitable hoist will be required to
remove and install the assembly.
The slings must be attached to the CEM as shown in
illustration 75.
Ensure that the slings only contact the body of the
CEM. A test lift may be required to achieve the
correct balance of the assembly.
Some applications may require a frame or jig to lift the
CEM. Connect the frame or jig only to the cradle of
the CEM. Refer to the Original equipment
manufacture for more information.
This document has been printed from SPI2. NOT FOR RESALE