User Manual

Engine Air Cleaner for 1206F-

E70TA, 1206F-E70TTA, 1204F-

E44TA, 1204F-E44TTA Engines

Illustration 1 g03179402

Typical example

The engine air cleaner (1) can be supplied as a loose

assembly. The engine air cleaner should be mounted

horizontally. The dust exhaust port must be at the

lowest point and positioned in a direction that is down.

Note: Do not paint the dust exhaust port. Solvents

and chemicals will shorten the usable life of the

exhaust port.

Note: There are several variations of engine air

cleaner.

Select the appropriate sized fasteners for the relevant

air cleaner. Bolts should have a flanged head or be

installed with a washer under the bolt head.

Standard duty air cleaner

Tighten the M10 bolts to the following torque.

. . . . . . . . . . . . . . . . . 38.5 ± 5.5 N·m ((28.4 ± 4.1 lb ft))

Heavy-duty air cleaner

Tighten the M8 bolts to the following torque.

. . . . . . . . . . . . . . . . . . . . . 15 ± 3 N·m ((133 ± 27 lb in))

Illustration 2 g03415816

Typical example

The position of the clamp (2) in relation to pipe or

component bead (3) is crucial. Ensure that clamp (2)

is installed on the correct side of the pipe or

component beads (3).

Air Temperature Sensor for 1206F-

E70TA, 1206F-E70TTA, 1204F-

E44TA, 1204F-E44TTA Engines

The air temperature sensor can be supplied loose.

This document has been printed from SPI2. NOT FOR RESALE