User Manual

Illustration 56 g03692759

Typical example

a. Remove plug (4) and O-ring (5) from engine oil

filter base (6).

b. Install O-ring (7) to elbow (8).

c. Install elbow (8) to engine oil filter base (6).

d. Tighten elbow (8) to a torque of 65 ± 10 N·m

(48 ± 7 lb ft).

Illustration 57 g03692776

Typical example

4. Install O-rings (9) to connections (10) at each end

of hose assembly (11).

5. Install connections (10) of hose assembly (11) to

connection (3) and elbow (8).

Illustration 58 g03693261

Typical example

6. Tighten connections (10) at each end of hose

assembly (11) to a torque of 65 ± 10 N·m

(48 ± 7 lb ft). Ensure that hose assembly (11) is

installed in the correct orientation. Refer to

illustration 58.

Illustration 59 g03693263

Typical example

7. Follow Step 2.a through Step 2.c to install the

connection to the remote mounted engine oil filter

base. Tighten connection (13) to a torque of

90 ± 13 N·m (66 ± 10 lb ft).

8. Follow Step 3.a through Step 3.d to install the

elbow to the engine oil filter base. Tighten elbow

(12) to a torque of 90 ± 13 N·m (66 ± 10 lb ft).

This document has been printed from SPI2. NOT FOR RESALE