Operation and maintenance manual

SEBU8601-01 55
Operation Section
Engine Diagnostics
(Table 5, contd)
Multiple Engines on J1939
Air Shutoff
ARD Auto Regeneration Enable Status
Throttle Lock Feature Installation Status
PTO Mode
Throttle Lock Engine Set Speed #1
Throttle Lock Engine Set Speed #2
Throttle Lock Increment Speed Ramp Rate
Throttle Lock Decrement Speed Ramp Rate
Throttle Lock Engine Set Speed Increment
Throttle Lock Engine Set Speed Decrement
Monitoring Mode Shutdowns
Monitoring Mode Derates
Limp H
ome Desired Engine Speed
Engine Acceleration Rate
Engine Speed Decelerating Ramp Rate
Intermediate Engine Speed
Fan
Engine Fan Control
Eng
ine Fan T ype Configuration
Engine Cooling Fan Pulley Ratio
Engine Cooling Fan Temperature Error Increasing Hysteresis
Engine Cooling Fan Temperature Error Decreasing Hysteresis
Engine Cooling Fan Current Ramp Rate
Engine Cooling Fan Speed
Top Engine Fan Speed
Minimum Desired Engine Cooling Fan Speed
Engine Cooling Fan Solenoid Minimum Current
Engine Cooling Fan Solenoid Maximum Current
Engine cooling Fan solenoid Dither Frequency
Engine Cooling Fan Solenoid Dither Amplitude
Fan Temperatures
Engine Fan Control Charge Air Cooler Outlet Temperature Input
Enable
Engine Cooling Fan Maximum Air Flow Charge Air Cooler Outlet
Temperature
Engine Cooling Fan Minimum Air Flow Charge Air Cooler Outlet
Temperature
Engine Cooling Fan Control Coolant Temperature Input Enable Status
Engine Cooling Fan Maximum Air Flow C oolant Temperature
(continued)