Installation Manual

Electrical & Electronic Application And Installation Manual
Production Release Version 1.0
Page 48
5.0 Connectors & Wiring Harness Requirements
This section provides details on each of the connector that must be used to
connect the mandatory engine and aftertreatment electrical components.
5.1 Engine ECM J1 Connector
The engine ECM connector for the Tier 4Final/Stage IV engine A5:E2 V2
ECM is an 86 pin connector. The ECM J1 connection is used by the customer
/ OEM as the main interface back to the engine control module for both the
engine aftertreatment system and machine control.
Qty
Description
Supplier
Part
Number
Supplier
1 86 Way J1 ECM Plug Assembly DRCP28-86SA Deutsch
1 Connector Dress Cover 398-3671 Perkins
1 Seal 0413-204-2005 Deutsch
High Volume Terminals
80 Connector 16,18 AWG Socket
Stamped and Formed
1062-20-0377 Deutsch
6 Connector 12, 14 AWG Socket
Stamped and Formed
1062-12-0166 Deutsch
Solid Terminals Low Volume
80 Connector 18-16AWG Socket 0462-005-20309 Deutsch
6 Connector 12-14AWG Socket 0462-203-12141 Deutsch
Cavity Seals
N/A Connector Cavity Seals 1-80 0413-204-2005 Deutsch
N/A Connector Cavity Seals Position 81-
86
114017 Deutsch
Table 5.1 ECM J1 Connector Components
5.1.1 J1 Connector Layout
Figure 5.1 ECM J1 Deutsch DRC Connector