Installation Manual

Electrical & Electronic Application And Installation Manual
Production Release Version 1.0
Page 47
4.9.3 Switch Return
All of the following Features and switches must be connected back to the
engine ECM J1 GND switch return pin 36.
ECM
Feature
J1 Pin
Location
Regen Readiness 74
IVS 1 75
IVS 2 / Throttle Arbitration 66
PTO Mode On / Off /
MPTS 2
51
Raise / Resume / MPTS 3 52
Lower / Set / MPTS 4 43
PTO Disengage / MPTS 1 67
Speed Select 1 & 2 / User
Defined Shutdown
68
Overspeed Verify Switch 50
Table 4.11 Switch to Ground Connections
4.9.4 Digital Return
All of the following Features and switches must be connected back to the
engine ECM J1 digital return pin 64.
ECM Feature
J1 Pin
Location
PWM Throttle 1 79
PWM Throttle 2 80
Water In Fuel Switch 76
Aftertreatment ID Module 70
Table 4.12 Digital Signal Connections