Installation Manual

Electrical & Electronic Application And Installation Manual
Production Release Version 1.0
Page 207
This sensor as with the auxiliary temperature sensor incorporates a pigtail
harness as part of the sensor assembly. Special installation considerations
for this type of sensor are given in section 5.8 of this document. An example
of the auxiliary pressure sensor and the length of the pigtail are shown in
figure 15.9 and the components required to connect the sensor to the engine
ECM are shown in table 15.13
Figure 15.9 Auxiliary Pressure Sensor T400040
REQUIRED PARTS
Perkins
Part
Number
Supplier Part number
Desc
ription
Qty
T400040 N/A Pressure Sensor
(Auxiliary)
1
N/A N/A Connector Plug kit 1
TBD Deutsch DT06-3S-EP09 Connector Plug 1
TBD Deutsch W3S-P012 Wedge Lock 1
2900A016 Deutsch 0462-201-1631 Connector Socket
(Gold)
3
Table 15.13 Auxiliary Pressure Sensor Installation Parts List
The auxiliary pressure sensor is a three wire active sensor which requires
connection to the ECM J1 analogue sensor 5V supply and ground pins as
shown in figure 15.10.
Figure 15.10 Auxiliary Pressure Sensor Installation Wiring