Installation Manual

Electrical & Electronic Application And Installation Manual
Production Release Version 1.0
Page 155
100%
5%
5%
Pedal Rotation
Lock Screws
Pedal
Sensor
Foot Force
21%
25%
Idle Validation Switch
ON
O
F
F
ON
O
F
F
ON
OFF
Figure 11.13 Idle validation switch transition
11.11 Definition of Engine Speed Points
There are a number of engine speed configuration points available for
configuration by the customer. These points effect the engines operation
when installed into a machine and should be configured to meet the specific
needs of the Application. Each point is listed below and shown and in figure
11.14 where there relationship with the torque curve can be seen.
Configurable by the customer;
• Engine Low Idle Speed (LI)
• Engine High Idle Speed (HI)
• Engine Rated Speed (RS)
Fixed Parameters which are non-configurable;
• Engine Low Idle Speed Lower Limit (LILL)
• Engine Low Idle Speed Upper Limit (LIUL)
• Engine High Idle Lower Limit (HILL)
• Engine High Idle Upper Limit (HIUL)
• Rated Speed Lower Limit (RSLL)
• Rated Speed Upper Limit (RSUL)