Troubleshooting

134 RENR2696-01
Troubleshooting Section
Test Step 10. Remove the Throttle
Position Sensor from the E ngine Speed
Control Assembly.
g007
06977
Illustration 50
Accelerator pedal as sem bly
A. Turn t
he keyswitch to the OFF position.
B. Record the position of the sensor before removing
the t
hrottle position sensor.
C. Remove the throttle position sensor from the
hous
ing and inspect the cables for signs of wear.
D. Connect a multimeter to terminal C of the Breakout
T.
E. Turn the keyswitch to the ON position.
F. Recor
d the output signal of the throttle position
sensor with the sensor slot in the released
position.
G. Record the output signal of the throttle position
sensor with the sensor slot in the advanced
posi
tion.
Expected Result:
The throttle position sensor output is 10 percent or
less.