Troubleshooting

112 RENR2696-01
Troubleshooting Section
Test Step 10. Remove the Throttle
Demand Sensor from the Engine Speed
Control Assembly.
g007
06977
Illustration 33
Accelerator pedal as sem bly
A. Turn t
he keyswitch to the OFF position.
B. Record the position of the sensor before removing
the t
hrottle demand sensor.
C. Remove the throttle demand sensor from the
hous
ing and inspect the cables for signs of wear.
D. Connect a multimeter to terminal C and terminal B
of th
e Breakout T.
E. Turn the keyswitch to the ON position.
F. Recor
d the signal voltage of the throttle demand
sensor with the sensor slot in the released
position.
G. Record the signal voltage of the throttle demand
sensor with the sensor slot in the advanced
posi
tion.
Expected Result:
The output from the throttle demand sensor is 0.5
volts or less with the sensor slot in the released
posi
tion.