Installation Guide

0446ES | 03/2021 | PAGE 7 OF 9
PERGO® IS MANUFACTURED AND DISTRIBUTED BY MOHAWK INDUSTRIES, INC.
MOHAWK TECHNICAL SERVICES - HARD SURFACE | 888.387.9881 OPTION 3 | [e-mail]
Rigid Core Vinyl Plank Installation Instructions
Defense+
™
Installing Under Doorway Frames
15. When the new flooring meets a threshold or a doorway, we recommend undercutting the door jamb. To secure the right cut,
turn a plank upside down and place it on the floor up to the door frame. Then place a reciprocating saw flat against the plank
and simply cut through the frame. Remove the cut-out piece and vacuum away debris. Slide plank under pre-cut door frame.
Door frame should be cut so that a 3/8" (9 mm) gap is located from the edge of the plank under the casing to the wall.
16. Tap the long side joint closed first, then tap the end joint closed.