Installation Guide

0180_Jan20_5in1 P.3
END PROFILE
TRANSITION
PROFILE
!
2
4
6
1
3
5
5 STAIR NOSE
For installation of the 5 in 1 molding
as a stairnose, a separate aluminium
subprole is needed. Do not use the
plastic rail included in this packaging,
but ask your dealer for the aluminium
subprole for installation on stairs.
Installation details: see the packaging
of that subprole.
3, 4 END PROFILE / CARPET
TRANSITION
First cut the prole to the correct length.
Use the slitter to cut away piece B to
obtain an end prole/square nose. When
installing against a vertical surface: cut
the plastic rail to the correct length and t
it on top of the suboor with the long lip
against the vertical surface. The short lip
serves as a spacer. Rail installation: see
below. Ensure that there is a sucient
expansion gap between the oor and the
raised legs of the rail in which the prole
will be clamped. Gently press from one
side of the rail to the other. Press against
the oor. Installing against a horizontal
surface: identical to installing an adaptor
prole/reducer.
5 IN 1 Multi-Functional Molding | English