Installation Guide
Care and Cleaning
Dry wipe as primary cleaning method. Occasionally damp wipe with water only. NO wet washing. DO NOT use detergents, abrasive cleaners, soaps, waxes
or polishes. Wipe o spills immediately. DO NOT allow moisture to remain on the product surface for longer than 30 minutes.
DO NOT attach objects such as pictures, shelves or television mounts directly to the locking engineered hardwood wall. DO NOT apply adhesive backed
hooks or install screws or nails into the locking engineered hardwood wall for hanging objects. Instead, drill clearance holes through the locking engineered
hardwood and mount these objects directly to wall studs with screws or nails. Drill the clearance holes through the locking engineered hardwood at least ¼"
larger than the diameter of the fastener that will be used.
Precautionary Measures: Power tools should be equipped with a dust collector. If high dust level are encountered use an appropriate NIOSH designated
dust mask. Avoid dust contact with skin and eyes. First Aid Measures in case of irritations: In case of irritation ush eyes and skin with water for at least 15
minutes.
ATTN: INSTALLERS Caution: Wood Dust
Sawing, sanding and machining wood products can produce wood dust. Airborne wood dust cause respiratory, skin and eye irritation. The International
Agency for Research on Cancer (IARC) has classied wood dust as a nasal carcinogen in humans.