Measurement Guide

Multiply the length by the width of your room(s) to determine
the estimated square footage (A).
Add a 10% waste factor to your total square footage to account
for cutting, installation errors and variation in fl oor design.
Divide the total required square footage (B) by the number of
square feet covered per carton of the fl oor you are installing.
x
=
length (ft.) width (ft.) sq. feet
+ =
sq. feet total sq. feet
(round up)
extra
(multiply A by 1.1)
10
%
÷
=
total sq. feet total number of cartons
(round up)
sq. ft. per carton
(check product
information page)
Note: If you have an island
in your room, you may want
to deduct that area from
your total square footage.
Measure the length of the
island and multiply by the
width. Deduct the total
from the amount that you
have in box A.
A
B
TIP: If the Pergo fl oor you selected does not include an
attached underlayment, you’ll need to purchase one.
Divide your project’s total square footage (B) by the number of
square feet in each roll/package of underlayment to fi nd the total
number of rolls/packages required.
÷
=
total sq. feet total number of rolls/
packages
(round up)
average square feet
per roll/package of
underlayment
B
100
When installing over concrete, you’ll need a vapor barrier.
We recommend using Pergo FloorMate Underlayment that
features a built-in vapor barrier.
A
B
2 PERGO
®
HIGH PERFORMANCE WOOD FLOORS PERGO
®
HIGH PERFORMANCE WOOD FLOORS 3