Installation Guide

PERGO
®
IS MANUFACTURED AND DISTRIBUTED BY UNILIN NORTH AMERICA, LLC
CUSTOMER SERVICE | 1-800-33-PERGO | NA.PERGO.COM/CONTACT-US
06/2021 | PAGE 7 OF 7
Locking Engineered Hardwood - Floor Installation Instructions
Defense+
™
The owner/installer assumes all responsibility for final inspection of product quality. Examine flooring for color, finish and
style prior to installation. If material is unacceptable, contact the seller immediately. Wood is a natural product and contains
characteristics such as variations in color, tone and graining. Flooring is manufactured in accordance with industry standards,
which allows manufacturing and natural deficiency tolerances up to 5% of the total installation. Installer should work from
minimum of 3 cartons at the same time to ensure good color and shade blend. The installer must use reasonable selectivity and
hold out or cut o piece with deficiencies. DO NOT install undesirable pieces. Flooring warranties DO NOT cover materials with
visible defects once they are installed. Installation is acceptance of product quality.
It is the responsibility of the installer and owner to ensure that jobsite, environmental, subfloor and subsurface conditions
involved meet or exceed all requirements as outlined in installation instructions prior to installation. Manufacturer declines
all responsibility for product performance or installation failure due to subfloor, substrate or environmental deficiencies or
jobsite conditions.
For service under the warranty please contact your local The Home Depot store. Describe the problem and in many cases, they
can provide you with a solution.
For installation, maintenance and technical questions please call 1-800-33-PERGO.
Pergo locking engineered hardwood flooring is manufactured by
Unilin Flooring North America LLC
550 Cloniger Drive
Thomasville, NC 27360
Warranty Conditions