Installation Instructions

INSTALLING the HANG RAILS
Remove Anti-Skid Bumper Use two
screws to
fasten into
studs.
1 2 3 4
ALTERNATIVE MOUNTING INSTRUCTIONS
On a wall
On a stud
INSTALLING ACCESSORIES ON A HANG RAIL
1. Using a stud finder to locate the studs, mark the center of each stud. In most homes studs are spaced 16" apart.
2. Level the Hang Rail, and mark the screw locations that are on the studs.
3. Using a 3/16" drill bit, drill holes at every marked location that represent your screw holes.
4. Using #10 x 1-1/4" pan head screws, fasten the Hang Rail to the wall at every stud. NOTE: For maximum safety and durability attach the
Hang Rail at every place the Hang Rail crosses a stud.
5. Attach the accessory to the Hang Rail.
6. Press the lock up to secure the accessory to the Hang Rail.
PLEASE FOLLOW INSTRUCTIONS.
FAILURE TO DO SO MAY RESULT IN INJURY.
5 6
Installed Accessory View