USERS’ MANUAL 72” WORKBENCH 72” Workbench SKU#2451799
Important When you open the carton, please carefully check the contents and make sure there is no damage. If you have any problem or find any part damaged or missing, please contact us first. Do not return the product to the store before contacting us. Do not dispose of the carton until you are completely satisfied with the product. To reduce the risk of injury, please read and understand this manual before assembling or using this product for the first time.
Assembly Instructions 1. Parts List Item No.
2. Install the workbench Note: The leveling feet are already installed on the legs. We recommend using at least 2 adults to finish the assembly. 1) Fasten legs to the wood top Lay down the worktop on a soft surface, align the holes on legs with the insert nuts on the work top, and use eight M8X16 hex bolts (Item No.4) to connect them together. DO NOT tighten bolts completely. 2) Fasten support to the wood top Align the holes of support (Item No. 3) with the insert nuts on the worktop.
3) Fasten support to the legs Use four M8X65 hex bolts (Item No. 2) and four M8 hex flange nuts (Item No. 6) to fasten the support to the legs. DO NOT tighten bolts completely. 4) Adjust the legs Use eight M8×65 hex bolts (Item No. 2) and eight M8 hex flange nuts (Item No.6) on the adjustable legs to get the desired height. 5) Tighten all the bolts Once all the bolts are installed, tighten them completely. 6) Stand up the workbench Please use two or more adults to finish this step.
Maintenance 1. Periodically clean the workbench with mild detergent and water. 2. For safety, use a non-flammable cleaning fluid. Grease and oil can be removed with most standard cleaning fluids. 3. DO NOT allow water and other fluids to remain on the workbench for any length of time. 4. DO NOT OVERLOAD THIS PRODUCT.
