Assembly Instructions

Assembly
1
Attaching the cabinet handle
Position the cabinet handle (B) over the holes on the
cabinet (A).
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
□
□
CAUTION:
Two people are recommended for assembly.
6
Attaching the casters
□ Be sure the drawers are locked and lay the cabinet (A)
□
Tighten with supplied hex key (CC) or 12 mm wrench/socket.
□ Return the cabinet (A) to its upright position.
CAUTION: Do not over tighten the bolts.
2
B
A
BB
AA
D
A
□
□
Attach 2 swivel casters (D) to the cabinet (A), on the same side as the handle (B) and attach the other 2 swivel casters (D)
to the opposite side of the cabinet (A). Insert bolts (AA) through swivel caster (D) into the cabinet (A).
Attach 2 fixed casters (C) to the center of the cabinet (A) by inserting bolts (AA) through fixed casters (C) into the cabinet (A
).
Installation of Power Cord
3
Gently pull cord plug through grommet.
□