Use And Care Manual

Securing to a Wall

Measure and mark the location of the left and right attachment holes on the wall.

Drill a 5/16” hole on the left and right side and insert the Drywall Anchor (EE) into the holes.

Use the ST6.3x75 screw (DD) and washer (FF) to secure each side of the the Back Panel (A) into the Drywall Anchor (EE).

□

Attaching the door

□

Align the holes on the hinge of the Left Door (H)

to the holes on the Side Panel.

Repeat process for the right door

(I with lock assembly).

□

Once cabinet is square and level, go back and

tighten all screws used in assembly.

Note: To maintain proper operation of the

cabinet doors, ensure the cabinet is completely

level by adjusting the four Leveling Feet (CC).