Use And Care Manual
Hanging Cabinet on Wood Frame Wall
7
Step 1: EVA assembly
Peel off the paper back from the 2 EVA Bumpers (CC), and afx in the appropriate position toward bottom
of Wall Cabinet back.
NOTE: Wall cabinet may need to be hung in the desired location to determine the appropriate position for EVA.
□
Step 2 Attaching Wall bracket
Measure and mark the location of the holes on the wall into a minimum of 2 wall studs.
Ensure the bracket is level.
Use the ST6.3x75 Screws (DD) and Washers (EE) to attached Bracket (C) into the wall studs.
□
Step 3: Hang Wall Cabinet
Once the Wall bracket is secure, hang Wall Cabinet
and ensure attachment is secure and level.
□
7
Attaching the door
6
□
□
Align the holes on the hinge of the Left Door (G)
to the holes on the Side Panel.
Repeat process for the Right Door
(H with lock assembly).
□
Once cabinet is square and level, go back and
tighten all screws used in assembly.
G
H
When hanging the wall cabinet with supplied wall bracket, be sure the bracket is level and secured to a minimum
of 2 wall studs with supplied fasteners. If attaching to masonry, use appropriate masonry fasteners.
Failure to do so may cause the wall cabinet to fall.
A
C
DD
EE
CC
Do not use
Drywall anchors to install
the wall bracket.
WARNING!