Use And Care Manual
18
CHANGING THE LASER BATTERIES
The batteries that operate the laser will have to
be replaced after considerable use of the laser.
1. Turn the laser switch OFF.
2. Remove the laser cover screw (1) using a
#2 screwdriver (Fig. 12).
3. Lift the laser cover (2) off the top of the laser
assembly (Fig. 13).
4. Remove the two old batteries (3).
DANGER: Never allow the laser beam to
shine into a person’s eyes. Serious eye damage
could result. Make sure the laser switch is OFF
and the laser is NOT pointing toward you while
replacing the laser batteries and when checking
the laser function.
5. Insert two new batteries.
NOTES:
a) Use two 1.5V LR 44 batteries
b) Install the batteries with the "+" side (4) of
the batteries facing the rear of the tool.
6. Re-install the laser cover and fasten it in
place with the laser cover screw.
ASSEMBLY AND OPERATING
!
Fig. 12
1
2
3
4
Fig. 13