Installation Instructions

Page 13
CONTENTS
Miter saw, 40T carbide-tip blade, 2 extension
wings, hold-down clamp, hex key, dust
collection bag, operator’s manual
UNPACKING
Carefully remove the
tool and any accessories from the box.
Make sure that all items listed in the
packing list are included.
WARNING:
Inspect the tool
carefully to make sure that no breakage or
damage occurred during shipping.
WARNING:
Do not discard the
packing material until you have carefully
inspected and satisfactorily operated the
tool.
SAWDUST EJECTION PORT
(FIG. 2)
This miter saw comes with a dust bag to
help you keep the work area clean. The dust
bag is ideal for smaller jobs. The dust port
also accepts a standard 1 1/2” (3.8 cm)
vacuum tube for dust collection.
SQUARING THE BLADE TO
THE FENCE (FIG. 3)
Failure to unplug your
saw could result in accidental starting
causing serious injury.
1. Unplug the saw.
2. Set the bevel and miter angles to 0°.
3. Lower and lock the saw arm in the
“DOWN” position.
4. Place the heel of a carpenter’s square
(available separately) against the blade
and the rule of the square against the
fence (Fig. 3).
NOTICE: Be sure to rest the square
against the body of the blade, and not
against the teeth of the blade.
ASSEMBLY
FIG. 2
WARNING:
WARNING:
FIG. 3
FIG. 4
Fence locking knob
Hex-head bolts