4-Volt CORDLESS SCREWDRIVER WITH FLASHLIGHT 241-1371 Owner's Manual SPECIFICATIONS Rechargeable Battery 4V DC, LITHIUM-ION Normal Charging Time 3~5 Hours No Load Speed 220 RPM Chuck Size 1/4” Hex Collet Need Assistance ? Call us on our toll free customer support line : 1-866-915-8626 • Technical questions • Replacement parts • Parts missing from package
TABLE OF CONTENTS RULES FOR SAFE OPERATION………..……………………………...…Page 3 DESCRIPTION………..……………………………………………........ Page 6 OPERATION………..………………………………………………….. Page 7 MAINTENANCE………..………………………………………............. Page 9 PARTS LIST……………..……………………………………………... Page 10 SCHEMATIC DRAWING ……………..
RULES FOR SAFE OPERATION KNOW THE TOOL To operate this tool, carefully read this Owner’s Manual and all labels affixed to the tool before using. Keep this Manual available for future reference. IMPORTANT This tool should only be serviced by a qualified service technician. READ ALL INSTRUCTIONS THOROUGHLY GENERAL SAFETY RULES FOR ALL POWER TOOLS WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
Avoid accidental starting. Be sure switch is off before plugging in or attaching the battery. Carrying tools with your finger on the switch or powering tools that have the switch on invites accidents. Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times.
Do not alter or misuse tool. These tools are precision built. Any alteration or modification not specified is misuse and may result in a dangerous condition. Service Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual.
SAFETY SYMBOLS FOR YOUR TOOL The label on your tool may include the following symbols. V A Hz W min ~ no .../min Volts Amperes Hertz Watts Minutes Alternating current Direct current No-load speed Class II construction, Double Insulated Revolutions or Strokes per minute Indicates danger, warning or caution. It means attention! Your safety is involved. DESCRIPTION Before attempting to use this product, familiarize yourself with all operating features and safety rules.
On/Off trigger switch. To turn tool on, press the trigger switch. To turn the tool off, release the trigger switch. Forward/Reverse switch. The forward/reverse switch should only be operated when the motor is NOT running. Worklight. For working in dark spaces. LED Battery Capacity Indicator. Allows end user to know when to charge tool Flash light switch. For low-light situations. Two Position Adjustment Switch . Adjustable 2-position handle allows for operation in either in-line or pistol-grip.
Do not place the power unit in an area of extreme heat or cold. It works best at normal room temperature. The base of the tool or power unit may become warm during charging. WARNING! Only use the original power unit to charge the tool; use of other power units may cause fire, explosions, and serious injury. NOTE: During the charge, the tool can’t be turned on. WARNING! Charging time must not exceed 15 hours; the battery may be damaged with excessive charging.
The center position of the switch locks the tool in the “OFF” position. When changing the position of the switch, be sure the trigger is is not depressed. Fig.3 Two Position Adjustment (Fig.3) The driver can be used as one straight driver. First press the rotation button, turn the front section in an anticlockwise direction and then release the button when can not turn it again. NOTICE: Do not use screwdriver as a pry bar in either position.
PARTS LIST WARNING: When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the cordless screwdriver. Any attempt to repair or replace electrical parts on this cordless screwdriver may create a safety hazard unless repairs are performed by a qualified technician. For more information, call the toll-free helpline, at 1-866-915-8626. NO. DESCRITION NO.
SCHEMATIC DRAWING 11
PERFORMAX™ 4-VOLT CORDLESS SCREWDRIVER WARRANTY 30-DAY MONEY BACK GUARANTEE:: This PERFORMAXTM brand power tool carries our 30-Day Money Back Guarantee. If you are not completely satisfied with your PERFORMAX TM brand power tool for any reason within thirty (30) days from the date of purchase, return the tool with your original receipt to any MENARDS ® retail store, and we will provide you a refund – no questions asked.
