Use And Care Manual

Page 3 Item 261-3328
Assembly Instructions
Note: If desired, the Fixed and Swivel Casters (6, 7) can be installed on opposite ends.
1.
2.
3.
Place the Fixed Casters (7) over
the ends of the Bolts (9) on the
bottom of the Platform (4), and
secure in place using Nuts (8).
4.
Attach the Swivel Casters (6)
to the other end of the Platform
(4)
using Nuts (8) and Bolts (9).
Tighten all Bolts (9) securely.
Unscrew Nuts (8) from Bolts (9).
To unfold for use:
1. Swing the Handle Tube (2) upward
until it locks upright.
2. Step on the Pedal Bar (3).
3. Pull up on the Handle (1) to extend it from
the Handle Tube until it clicks into place.
4. Pull up on the Lock (5), extend the
Platform, then re-engage the Lock.
To fold for storage:
1. Pull up on the Lock (5), retract the
Platform, then re-engage the Lock.
2. Step on the Pedal Bar (3).
3. Push the Handle (1) back into the
Handle Tube (2) until it clicks into place.
4. Push the Handle Tube (2) forward until
it lays flat.
Operation Instructions
Parts List and Diagram
Part Description Qty.
1 Handle 1
2 Handle Tube 1
3 Pedal Bar 1
4 Platform 1
5 Lock 1
6 4" Swivel Caster 2
7 4" Fixed Caster 2
8 Nut M8 16
9 Bolt M8 x 30 16
10 Washer 16