SDS

ManualsBrandsPerformax ManualsAbrasive Wheels4-1/2" x 1/8" Masonry Cut-Off Wheel

Silicon Carbide Resinoid Bonded Cutting/Grinding Wheel

Safety Date Sheet

Test Report-SDS-1211090030-A (E)

Section I

Manufacturer's Name: ZHEJIANG JINHUA CUMET ABRASIVE CO., LTD.

Address: JINDONG ECONOMIC ZONE JINHUA ZHEJIANG.CHINA.

Emergency Telephone Number: 86(579) 82978168

Telephone Number for Information: 86(579) 82983798

Date prepared: 15

DEC., 2014

Name of preparer: Eric Liu

Section II - Composition of Components

Hazardous

Components

(Common Name)

CAS# OSHA

PEL

OSHA

REG.

Y/N

ACGIH

TLV

OSHA

Carcinogen

(Y/N)

Max.%

Silicon Carbide

(Silicon Carbide)

1344.28.1

10mg/m

Y 10 mg/m

N 90%

Iron Oxide

(Iron Oxide)

1309.37.1

10mg/m

Y 5mg/m

N .05%

Silicon Dioxide

(Silicon Oxide)

7631.86.9

6mg/m

N *NAIF N 4%

Sodium-Hexafluoro

(Cryolite)

15096.52.3

*NAIF Y 2.5mg/m

N 7%

Calcium Metasil

(Wallastonite)

13983.17.0

*NAIF Y *NAIF N 3%

Prepreg Fiber

(Fiberglass)

*NAIF *NAIF Y 10 mg/m

N 5%

Section III - Physical / Chemical Characteristics

Boiling Point: **N/A

Vapor Pressure (mm Hg.): **N/A

Vapor Density (AIR=1): **N/A

Solubility in Water: Slight

Specific Gravity (H2O=1): 2.0

Melting Point: 900 degrees fahrenheit

Evaporation Rate (Butyl Acetate=1): **N/A

Appearance and Odor: Dark brown to black color slight

Continued on page 2

Test Report-SDS-1211090030-A (E)

Summary of content (4 pages)

PAGE 1
Silicon Carbide Resinoid Bonded Cutting/Grinding Wheel Safety Date Sheet Test Report-SDS-1211090030-A (E) Section I Manufacturer's Name: ZHEJIANG JINHUA CUMET ABRASIVE CO., LTD. Address: JINDONG ECONOMIC ZONE JINHUA ZHEJIANG.CHINA. Emergency Telephone Number: 86(579) 82978168 Telephone Number for Information: 86(579) 82983798 Date prepared: 15th DEC., 2014 Name of preparer: Eric Liu Section II - Composition of Components Hazardous Components (Common Name) CAS# OSHA OSHA ACGIH OSHA Max.% PEL REG.
PAGE 2
Section IV - Fire and Explosion Hazard Data Flash Point (method used): **N/A Flammable Limits: LEL: **N/A UEL: **N/A Extinguishing Media: Water spray, CO2 Special Fire Fighting Procedures: Fire fighters should wear self-contained breathing apparatus to avoid inhalation of smoke or vapors.
PAGE 3
Section VI - Health Hazard Data Primary Route(s) of Entry Acute and Chronic Health Effects and Effects of Overexposure Acute: Possible cough. Inhalation (during grinding) Chronic: May effect breathing capacity. No known adverse affects, but Ingestion (during grinding) ingestion not recommended. Some may experience skin Skin (during grinding) (contact irritation from dust. & absorption) Dust may irritate eyes.
PAGE 4
Section VIII - Control Measures Respiratory protection (specify type): MSHA - NIOSH approved respirators - See OSHA 29CFR1910.134 Ventilation: Yes Local Exhaust: See OSHA 29CFR1910.94 & 1000 Mechanical (General): Wheel Guards Special: Avoid contact with sparks Other: Do not wear contact lenses Protective gloves: As desired by user Eye protection: Recommended - See OSHA 29 CFR 1910.133 Other protective clothing or equipment: Safety shoes, fireproof clothing, head and ear protection.