Reciprocating Saw 241-0990 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-858-2664. (M-F 8:30am-5:00pm Est.
TABLE OF CONTENTS Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY SYMBOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
SAFETY INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and / or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
SAFETY INSTRUCTIONS 6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust devices can reduce dust-related hazards. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct power tool for your application.
SAFETY INSTRUCTIONS 3. Before plugging the tool in, check that the trigger switch is in the “OFF” position. Accidental start-ups could cause injury. 4. Keep hands away from cutting area. Do not reach under the material being cut. The proximity of the blade to your hand is hidden from your sight. 5. Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications that generate dust. 6. Wear ear protection. Exposure to noise can cause hearing loss. 7.
OVERVIEW FIG. 1 Blade Variable-speed trigger switch Blade-clamp lever Pivot shoe Tool-less blade clamp Shoe-adjustment screw SPECIFICATIONS Page 7 Rated Voltage 120 V~ 60 Hz Rated Power Input 9.5 A No load Speed 0-2800/min Blade stroke 1-1/8” (29mm) Tool Weight 7 lbs. 3 oz.
ASSEMBLY WARNING: If any part is broken or missing, DO NOT attempt to plug in the power cord or operate the tool until the broken or missing part is replaced. Failure to do so could result in possible serious injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.
OPERATION INSTALLING SAW BLADE (FIG.2) 1. 2. 3. 4. Unplug the saw from the power supply. Pull the blade-clamp lever as far as it will go to open the tool-less blade clamp. Insert the blade until it stops, then release the blade-clamp lever to lock the blade in position. Use your gloved hand to push in and pull out on the blade to be sure the blade is clamped securely. PIVOT SHOE SLIDING THE SHOE IN OR OUT (FIG.3) FIG. 2 Blade-clamp lever REMOVING THE SAW BLADE (FIG.2) 1. 2.
OPERATION PIVOTING THE SHOE (FIG.4) The shoe pivots to provide maximum control against the surface being cut. 1. Unplug the reciprocating saw from the power supply. 2. Hold the saw firmly, and then pivot the shoe to the desired angle. FIG. 4 Pivot shoe TURNING ON AND OFF (FIG.6) 1. Connect the power cord of your reciprocating saw to a standard household power outlet. 2. To turn the saw ON, depress the variable-speed trigger switch. 3. To turn the tool OFF, release the trigger switch.
OPERATION GENERAL CUTTING 1. Disconnect the saw from the power supply. 2. Make sure that the workpiece is firmly anchored: clamp the workpiece to keep it from slipping or moving while cutting. 3. Use the appropriate type and size of blade for the workpiece material and size. 4. Adjust the pivot shoe as necessary to make sure that the blade will extend beyond the shoe and through the workpiece at all times. 5. Adjust the pivot shoe as necessary to expose unworn blade teeth for longer blade life. 6.
OPERATION PLUNGE CUTTING (FIG.7) Your reciprocating saw is ideal for plunge cutting directly into surfaces that cannot be cut from an edge, such as walls or floors. Plunge cutting may be done two ways, depending on how the blade is installed. FIG. 7 A Column A shows how to plunge cut with the teeth of the blade facing down. Column B shows how to plunge cut with the teeth of the blade facing up.
OPERATION 1. Disconnect the saw from the power supply. 2. Make sure that the workpiece is firmly anchored: clamp the workpiece to keep it from slipping or moving while cutting. 3. Use the appropriate type and size of blade for the workpiece material and size. 4. Install the blade into the tool. 5. Adjust the pivot shoe as necessary to make sure that the blade will extend beyond the shoe and through the workpiece at all times. 6.
MAINTENANCE WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service technician. WARNING: When servicing, use only identical replacement parts. The use of any other parts may create a hazard or cause damage to the product. WARNING: Unplug the reciprocating saw from the power source before cleaning or performing any maintenance. WARNING: Using compressed air may be the most effective cleaning method. Always wear safety goggles when cleaning tools with compressed air.
NOTES Page 15
NOTES Page 16
NOTES Page 17
RECIPROCATING SAW WARRANTY 30-DAY MONEY BACK GUARANTEE: This PERFORMAX® brand power tool carries our 30-Day Money Back Guarantee. If you are not completely satisfied with your PERFORMAX® brand power tool for any reason within thirty (30) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2015 Menard, Inc.
