Use And Care Manual

8
OPERATION
HOW TO CHARGE THE BATTERY PACK (Fig. 2)
NOTE: This battery pack is shipped
partially charged. Before using it the
first time, fully charge the battery
pack.
A fully discharged battery pack
will charge about 60-75 minutes
(depending on the battery type) in the
desired surrounding temperature.
1. Charge the battery pack with the
correct charger.
2. Connect the charger to a power
supply.
3. Attach the battery pack to the charger by aligning the raised ribs of the
battery pack with the slot in the charger. Slide the battery pack onto the
charger (Fig. 2)
4. The Charger will communicate with the battery pack’s circuitry to evaluate
the condition of the battery pack.
5. The green LED light will be flash continuously during normal charging.
6. After charging is complete, the green LED on the charger will be on.
7. The battery pack will fully charge, but will not overcharge, if left on the
Charger.
LED FUNCTIONS OF CHARGER (Fig. 3)
LED INDICATOR
BATTERY
PACK
RED LED
GREEN
LED
ACTION
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
HI / LO TEMP.
Hot/Cold
battery
On Off
Fast charge will begin
when battery returns to
desired temperature.
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
HI / LO TEMP.
Defective Flashing Off
Battery pack or charger
is defetive
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
HI / LO TEMP.
Charging Off Flashing Charging
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
HI / LO TEMP.
Fully
charged
Off On Charging is complete
BATTERY CHARGER
WARNI NG!
Li-ion
Model #: 252-0908
Risk of fire, explosion, and burns. Do not
disassemble, crush, heat above 212°F or
incinerate. Keep battery out of reach of children.
Use only with charger 252-0912.
Made in China
100520
Customer Service: 1-866-858-2664
Fig. 2