Use And Care Manual

14
CHUCK REMOVAL – cont’d
3. Tap the hex key sharply with a mallet (4) in
a clockwise direction. This action will
loosen the screw in the chuck for easy
removal.
4. Open the chuck jaws and remove the hex
key.
5. Open the chuck jaws as far as possible.
6. Remove the chuck screw using a
#2 screwdriver (Fig. 8).
NOTE: Turn screw CLOCKWISE to
remove it. This screw has a left hand
thread.
7. Insert the hex key into the chuck and
tighten the jaws of chuck securely (Fig. 9).
Tap the hex key sharply with a mallet in a
COUNTERCLOCKWISE direction. This will
loosen the chuck on the spindle. The chuck
can now be unscrewed and removed from
the spindle by hand
ASSEMBLY AND OPERATING
Fig. 7
1
2
3
4
Fig. 8
Fig. 9