User Manual

IMPORTANT SAFETY INFORMATION
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids. Do not bring
combustible materials near the tools.
3. As with any tool, use common sense when operating. Do not wear loose clothing or
jewelry that could become caught by moving parts, causing injury. Operate tool a
safe distance from yourself and others in the work area.
4. Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, hoses or extension cords.
5. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children and other
untrained persons. Switch off all unused electrical tools when stored. Tools are
dangerous in the hands of untrained users.
6. Always wear approved eye protection when using tools. If raising dust, wear a
suitable mask.
7. Work Safe. When wearing gloves to operate the tool, make sure that the gloves do
not interfere with operating the Trigger. Test your gloves with the Trigger before
attaching the unit to an air source. Keep your finger away from the Trigger until you
are ready to work. Never start the tool unless you have a firm grip with both hands
and you are positioned at your work piece or area. Before using the tool, know what
is directly underneath the work area or work piece. The tool can quickly penetrate
material. If working directly on the ground, make sure you are not directly above
shallow cables, lines, or pipes. Keep your limbs and body clear of the tool. If an
accessory or attachment breaks off, the tool tends to surge forward suddenly.
Operate tool a safe distance from yourself and others in the work area. Make sure the
immediate area is clear of other people or animals. Spectators must stay at a safe
distance. Never point the tool or the air hose (not included) at anyone. Keep proper
footing and balance at all times. Do not reach over or across running machines,
hoses, etc.
8. Do not operate any tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate any tool.
9. Be sure air is in OFF position when connecting tool to air supply.
10. Use only those accessories that are designed for use with tools. For example, with
impact wrenches do not use ordinary sockets. Use impact sockets for all air tools.
11. Be sure to disconnect tool from air supply before changing accessories, performing
service on tool and when not in use.
12. Follow air source manufacturers' directions for connection of regulators, filters, and
other accessories to air source. Do not install quick couplers directly on tool as they
put unnecessary strain on the air inlet threads possibly causing them to wear out
prematurely. Instead, install them on a short length of air hose attached to the tool.
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO
SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.