User's Manual

PAGE 1
AFTERGLOW?® WIRELESS HEADSET SET UP: BOX 360° CONNECTED WITH COMPONENT/COMPOSITE CABLE* *Cable comes with the Box console. 1. Plug the Afterglow® USB transmitter into one of the 4. Ra-plug in the RCA cable from the console into the front USB ports of the Box 360° console. pass-through of the Afterglow® RCA cable that is now plugged into the TV. 2. Unplug the RCA cable (Red/White only) that runs from your consoles to the TV. 5. Leave the Box 360° comprehensibility video plugs connected to the TV. 3.
PAGE 2
AFTERGLOW?® WIRELESS HEADSET SI CE CONNECTED WITH HDMI* *HDMI cable not included. 1. Plug the Afterglow® USB transmitter into the front USB port of the Box 360% console ~ Plug the RCA (Red/White) sends of the transmitter's audio cable Into the TV's Audio Out. Then skip to step 4. » If your TV does not have an RCA Audio Out: disconnect the RCA cable at its breakaway and expose the headphone jack. Plug the headphone jack of the USB transmitter into the TV's headphone input. 4.