User's Manual

3
Turning the headset on/off
1. To turn the headset on
Press and hold K1 Button for about 3 seconds, the blue indicator of the headset will flash 3 times
rapidly. The headset is now turned on.
2. To turn the headset off
Press and hold K1 Button for about 3 seconds, the red indicator of the headset will flash red 5
times rapidly. The headset will be turned off.
3. When the blue indicator flashes red during standby mode, it means the headset is on low
battery, please charge the headset.
Pairing
Before using your headset for the first time, you must pair it with your Bluetooth enabled phone.
1. Ensure that the headset is off (see “To turn the headset off” section).And the mobile phone
Bluetooth setting is activated.
2. Press and hold the K1 Button for about 4 seconds until the indicator light alternately flashes
blue and red
ˈ
you headset is under pairing mode.
Your PL-6453 Bluetooth headset adopts Proximity Pairing Technology to simplify the Bluetooth
setup process. For more details, please kindly check (Xa) item.
3(a) Once your headset is under pairing mode, it will search the nearest Bluetooth devices, like
your Bluetooth mobile phone automatically.
4(a) Your Bluetooth mobile phone will indicate “PL-6453” headset and ask if you want to pair with
it. Confirm this by pressing the “Yes” or “OK” key.
5(a) Enter a passkey or PIN code “0000” (4 zeros), then press the “Yes” or “OK” key. Once the
blue indicator flashes twice instead of blue and read indicator flashing, your headset has been
connected with your Bluetooth mobile phone.
Note: If the Bluetooth version of your Bluetooth mobile phone is V2.1, you will not need to enter a
Passkey (Pin code) during above pairing process.
You can also pair our PL-6453 headset with your Bluetooth mobile phone in the normal way, for
more details please kindly check (Xb) item: