User's Manual

ManualsBrandsPerformance Designed Products ManualsAudio EquipmentPS3 AG2 BT Headset

PL-6453 Bluetooth Headset User Manual

Thank you for purchasing the Bluetooth Headset PL-6453, we hope you will enjoy all its benefits.

Please read this user's guide to get start, and to make the best usage of the headset's many

features.

CAUTION:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modification to this equipment. Such modifications could void the user authority to operate

equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the

Party, responsible for compliance could void the user's authority to operate this equipment.

(Example - use only shielded interface cables when connecting to computer or peripheral

devices.

FCC ID : X5B-PL6453

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

IC: 8814A-PL6453

This device complies with industry Canada license-exempt RSS standard(s). Operation is subject

to the following two conditions: (1) this device may not cause interference, and (2) this device

must accept any interference, including interference that may cause undesired operation of the

device.



Le pr

sent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

Summary of content (7 pages)

PAGE 1
PL-6453 Bluetooth Headset User Manual Thank you for purchasing the Bluetooth Headset PL-6453, we hope you will enjoy all its benefits. Please read this user's guide to get start, and to make the best usage of the headset's many features. CAUTION: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user authority to operate equipment.
PAGE 2
exempts de licence. L'exploitation est autorisle aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiol lectrique subi, mmme si le brouillage est susceptible d'en compromettre le fonctionnement. Driving safety 1. Keeping your eyes on the road, driving is your foremost responsibility. 2.
PAGE 3
Turning the headset on/off 1. To turn the headset on Press and hold K1 Button for about 3 seconds, the blue indicator of the headset will flash 3 times rapidly. The headset is now turned on. 2. To turn the headset off Press and hold K1 Button for about 3 seconds, the red indicator of the headset will flash red 5 times rapidly. The headset will be turned off. 3. When the blue indicator flashes red during standby mode, it means the headset is on low battery, please charge the headset.
PAGE 4
3(b). Set your Bluetooth phone to discover the headset by following your phone's guide. Typically, the steps involve going to a ‘Setup’, 'Connect', or ‘Bluetooth’ menu on your phone and then selecting the option to discover Bluetooth devices. 4(b). Your phone will find the “PL-6453” headset and ask if you want to pair with it. Confirm this by pressing the “Yes” or “OK” key. 5(b). Enter a passkey or PIN code “0000” (4 zeros), then press the “Yes” or “OK” key.
PAGE 5
button once will redial the last number; 2. Depend on your phone type, the actual operation may vary. Ending a call 1. Shortly press K1 Button once during a call. 2. End a call from phone’s keypad. Answering a call 1. 2. Press the K1 button briefly, when you receiving an incoming call. Answer the call via your phone’s keypad. You may then need to transfer the call to the headset by pressing the K1 Button for 2 seconds (depending on your phone setting).
PAGE 6
To turn on the Muting Microphone: Press and hold the K2 Button & K3 Button at the same time. Simultaneously, you will hear 1 mute. Storage of the headset 1. Always store the headset with the power off and make sure it is safely protected. 2. Avoid storage at high temperatures (above 60ć) such as in a hot vehicle or in direct sunlight. (Storage at high temperatures can damage performance and reduces battery life). 3. Do not expose the headset or any of its supplied parts to rain or other liquids.
PAGE 7
supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Bluetooth® is a trademark owned by Bluetooth SIG, Inc. According to RSS-Gen, section 7.1.3, the following warning statements are missing from the User Manual: This device complies with industry Canada license-exempt RSS standard(s).