User Manual

2
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Driving safety
1. Keeping your eyes on the road, driving is your foremost responsibility.
2. Obey traffic laws at all times: Make sure that using a Bluetooth wireless headset while driving
is permitted by your local law.
BEFORE USING YOUR HEADSET
Checking phone compatibility
Ensure that your phone has Bluetooth capability by visiting your phone manufacturer's website.
Your headset overview
K1 Button: Turn on/ Turn off/ Pairing/ Answer/ End/ Voice Dial/ Reject/ Transferring a call/ Redial
K2 Button: Increase Volume
K3 Button: Decrease Volume
Checking the accessories
Make sure that you have the following items with your headset: USB Charging cable, Manual,
Ear-hook.
Charging the headset
Your headset uses a rechargeable battery. You must charge the battery fully before using the
headset for the first time.
1. Plug the USB Charging cable into an USB socket of PC.
2. Connect the USB Charging cable with headset as it shown on the picture. The red indicator of
headset will turn on when charging.
3. When the battery is fully charged, the red indicator will change to blue.
1) When the headset is in low battery, the headset will flash red instead of blue.
2) The headset will be fully charged in approximately 1-2 hours.
3) Remove the USB Charging cable from the USB socket.
WARNING: Do not attempt to charge the headset with anything other than the USB Charging
Cable provided. Using unauthorized USB Charging Cable may damage the headset.
IMPORTANT: The headset cannot be used while charging.