User's Manual

(051‐068‐NA)‐IRReceiverforHarmonyRemotesforPS4console–UserManual



SettingupyourHarmonyremote:



1) PleaserefertoyourusermanualincludedwithyourHarmonyremote,orvisit

setup.myharmony.comtosetupyourremote.

2) Whenyouaddadevicetotheremote,enter“PDP”forthemanufacturerand“IRReceiverfor

PS4”fortheDeviceModelNumber.

3) Yourremoteisnowready

tousewiththePDPIRReceiverforyourPS4console.

4) YoucanchangeandadjustyourbuttonstoyourlikingforthePS4consolecontrolsinthe

MyHarmonyApp.



SettingupyourIRReceiver:



1) PlugintheACadapterintoapowersupplyandplugthemicro‐usbcabletothebackoftheIR

Receiver.

2) PositionthePDPIRReceiversothatithasaclearlineofsightwithyourHarmonyreceiver.

3) TurnonyourPS4console.

4) Goto:

Settings‐>Devices‐>BluetoothDevicesonthePS4consolemenu.

5) OntheIRReceiver,pressandholdthesyncbuttononthebackfor5secondsuntilyouseethe

redLEDflashingonthefrontoftheIRReceiver.

6) WhiletheLEDisflashingontheIR

Receiver,youwillsee“PDPHarmonyBox”appearonthe

Bluetoothmenuscreen.Select“PDPHarmonyBox”ontheBluetoothDevicesmenuwitha

DualShock®4Co ntroller.NOTE:IfthePDPIRReceiverfailstosynctothePS4console,repeat

steps5and6.

7) OncethePDPIRReceiver

hasbeensynchedtoyourPS4console,yourHarmonyremotewillbe

readytouseforyourPS4console.

CAUTION:

Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoid

yourauthoritytooperatetheequipment.

Theequipmentcom plieswithFCCRFexposurelimites setforthforanuncontrolledenvironment.

Theequipmentmustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaor

transmitter

PAGE 1
(051‐068‐NA) ‐ IR Receiver for Harmony Remotes for PS4 console – User Manual Setting up your Harmony remote: 1) Please refer to your user manual included with your Harmony remote, or visit setup.myharmony.com to set up your remote. 2) When you add a device to the remote, enter “PDP” for the manufacturer and “IR Receiver for PS4” for the Device Model Number. 3) Your remote is now ready to use with the PDP IR Receiver for your PS4 console.
PAGE 2
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
Cetappareilestconforme aux CNR exemptes de licenced'IndustrieCanada . Son fonctionnementestsoumis aux deuxconditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositifdoit accepter touteinterférence , y compris les interférences qui peuvent causer un mauvaisfonctionnement de l'appareil.