Manualshelf

Full Product Manual

ManualsBrandsPerformance Built ManualsLog Splitters20-Ton 127 cc Kinetic Log Splitter
12345678910
- 8 -
STEP 6: Attach the Left Side of the Worktable
Note: Leave all bolts loose for steps 6, 7 and 8, then tighten all bolts once all parts are
installed.
1. Attach log cradle and left side of the worktable to the beam using hex bolt M10x30(x3), flat
washer Ø10(x3) and lock washer Ø10(x3), see figure shown below.
STEP 7: Attach the Right Side of the Worktable
1. Attach log cradle and right side of the worktable to the beam using hex bolt M10x30(x3), flat
washer Ø10(x3) and lock washer Ø10(x3), see figure shown below.