Full Product Manual

- 7 -
STEP 4: Mount Engine and Connecting Belts
1. Insert the engine assembly into slot, push the engine forward and install square nut(x1) and
nylon lock nut M10(x1).
2. Work the belts onto the grooves on engine clutch, ensuring belts stay in corresponding
grooves on fly wheels.
3. Put on engine position bolt(x1), adjust the belt tension by pushing down on the belt to ensure
the dent is less than 0.4inch.Once the belt tension is correct, lock engine position bolt in place.
STEP 5: Attach Front Bracket to the Beam
1. Attach the front bracket to front of the beam using hex bolt M10x30(x2), flat washer Ø10(x2),
lock washer Ø10(x2) and nylon lock nut M10(x2). Tighten all hardware.