Full Product Manual

- 6 -

STEP 2: Attach the Front Support Leg to the Beam

1. Attach the front support leg to the beam using hex bolt M10x30(x4), flat washerØ10(x4), lock

washerØ10(x4) and nylon lock nut M10(x4). Tighten all hardware.

STEP 3: Attach Beam to the Axle Assembly

1. Attach the beam assembly to the axle assembly using hex bolt M10x50(x4), large flat

washerØ10(x8), elastic cushion(x4),lock washer Ø10(x4) and nylon lock nut M10(x4).

Note: Axle assembly bolts should be tightened 1/2 turn past snug for best performance of

vibration dampeners, suggested torque is at the range of 12 to 13 lb. ft. (16-18 N. m.)

RECOMMEND

shop crane or hoist to

lift and position the

beam.