Full Product Manual

- 12 -
1. Break in period - Break in period for the kinetic splitter is 500 cycles.
2. Principle of operation - This unit is designed to outperform the traditional hydraulic 20ton log
splitter. Splitting power is derived from 1 spinning fly wheel. When actuation handle is moved to
split position, the rotational energy stored in flywheel is converted to splitting force. This unit is fast
and powerful. The result is a unit that splits wood up to 4 times faster than a conventional hydraulic
unit without the need for hydraulic fluid.
3. Push plate return speed adjustment. - Take off the end cover and pull the return spring down,
adjust the bolt to the necessary #1 hole is the lowest speed, #2 is quicker and for fastest use the
#3 hole.
WARNING
Before operating or using the log splitter, review the instructions below and all safety information
.
Failure to follow these instructions may result in property damage or injury to the operator or
bystanders.
WARNING
ALWAYS
use the log splitter for its intended use.
ONLY use the log splitter to split wood logs, length wise with the grain.
NEVER modify, alter or change the log splitter in anyway, modifications will void the warranty.
NEVER attach a rope, cable or other device to the handle on the log splitter.
ONLY operate the log splitter in daylight.
NEVER leave the log splitter unattended while the engine is running.
NEVER operate or let anyone else operate, the log splitter while under the influence of alcohol, drugs,
or medication.
Operation Instructions
Kinetic Splitter
General Information