Instructions / Assembly

IDENTIFICATION OF PARTS

Drain Tube (1 pc.) Garden Hose Adapter (1 pc.) Screws (2 pc.)

FRONT

ACCESSORIES

REAR

1. Control Panel

2. Air Filter (pull

up to remove)

3. Air Outlet Grill

4. Air Intake Grill

5. Water Bucket

6. Handle (both sides)

1. Drain Hose Outlet

2. Casters

3. Power Cord & Plug

4. Band (used only

when storing unit)

FIG. 2 FIG. 3

WHAT IS THE “FLOAT”? DOES IT NEED THE FOAM PIECE INSIDE OF IT?

Inside the bucket, on the right side, is an

“arm” mechanism that wobbles. This piece

is called the “oat.” DO NOT remove the foam

piece that is found in the plastic holder part

of the oat. (See Fig. 4.) If the piece is

removed, the bucket will overow.

Foam piece inside oat mechanism.

DO NOT REMOVE the foam.

NOTE: All the illustrations in this manual are for explanation purposes only. Unit purchased may be slightly dierent,

but the operations and functions are the same.

NOTE: Drain tube and adapter are located inside of the water bucket. Screws are located in a pouch inside the

packaging for this user manual.

FIG. 4

FIG. 5

CASTERS (#2 in diagram above)

• The casters are located at four points on the

bottom of the unit.

• Casters can move freely.

• Never force casters to move over carpet or

move the unit with water in the bucket. (The unit

may tip over and spill water.)