User's Manual

http://www.peplink.com 77 Copyright @ 2019 Pepxim
Use IP ToS
Checking this button enables the use of IP ToS header field.
Latency
Difference
Cutoff
Traffic will be stopped for links that exceed the specified millisecond value with respect to
the lowest latency link. (e.g. Lowest latency is 100ms, a value of 500ms means links with
latency 600ms or more will not be used)
A
- Advanced feature, please click the button on the top right-hand corner to activate.
To enable Layer 2 Bridging between PepVPN profiles, navigate to Network>LAN>Basic
Settings>*LAN Profile Name* and refer to instructions in section 9.1
8.41
WAN Connection Priority
WAN
Connection
Priority
If your device supports it, you can specify the priority of WAN connections to be used for
making VPN connections. WAN connections set to OFF will never be used. Only available
WAN connections with the highest priority will be used.
To enable asymmetric connections, connection mapping to remote WANs, cut-off latency,
and packet loss suspension time, click the button.
Send All Traffic To
This feature allows you to redirect all traffic to a specified PepVPN connection. Click the button to select your
connection and the following menu will appear: