User's Manual

http://www.peplink.com 69 Copyright @ 2019 Pepxim
Output Power
This option is for specifying the transmission output power for the Wi-Fi AP. There are
4 relative power levels available – Max, High, Mid, and Low. The actual output power
will be bound by the regulatory limits of the selected country. Note that selecting the
Boost option may cause the MAX’s radio output to exceed local regulatory limits.
11 MediaFast Configuration
MediaFast settings can be configured from the Network menu.
11.1 Setting Up MediaFast Content Caching
To access MediaFast content caching settings, select Advanced>Cache Control
Cache Control Settings
Domain
Choose to Cache on all domains, or enter domain names and then choose either Cache
the specified domains only
or
Do not cache the specified domains
.
Source IP
This setting allows caching to be applied to the user-specified IP subnets. If "Any" is
selected, then caching will apply to all subnets.