User's Manual

http://www.peplink.com 11 Copyright @ 2019 Pepxim
˗ Wi-Fi WAN connection
˗ Network address translation (NAT)/port address translation (PAT)
˗ Inbound and outbound NAT mapping
˗ IPsec NAT-T and PPTP packet passthrough
˗ MAC address clone and passthrough
˗ Customizable MTU and MSS values
˗ WAN connection health check
˗ Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-ip.org,
tzo.com and DNS-O-Matic)
˗ Ping, DNS lookup, and HTTP-based health check
3.1.2 LAN
˗ Wi-Fi AP
˗ Ethernet LAN ports
˗ DHCP server on LAN
˗ Extended DHCP option support
˗ Static routing rules
˗ VLAN on LAN support
3.1.3 VPN
˗ PepVPN with SpeedFusion
TM
˗ PepVPN performance analyzer
˗ X.509 certificate support
˗ VPN load balancing and failover among selected WAN connections
˗ Bandwidth bonding and failover among selected WAN connections
˗ IPsec VPN for network-to-network connections (works with Cisco and Juniper only)
˗ Ability to route Internet traffic to a remote VPN peer
˗ Optional pre-shared key setting
˗ SpeedFusion
TM
throughput, ping, and traceroute tests
˗ PPTP server
˗ PPTP and IPsec passthrough