User's Manual

Limit

requires the peer to use PepVPN version 4.0.0 or above.

Cost

Define path cost for this profile.

OSPF will determine the best route through the network using the assigned cost.

Default: 10

WAN

Smoothing

While using PepVPN, utilize multiple WAN links to reduce the impact of packet loss and get

the lowest possible latency at the expense of extra bandwidth consumption. This is suitable

for streaming applications where the average bitrate requirement is much lower than the

WAN's available bandwidth.

Off - Disable WAN Smoothing.

Normal - The total bandwidth consumption will be at most 2x of the original data traffic.

Medium - The total bandwidth consumption will be at most 3x of the original data traffic.

High - The total bandwidth consumption depends on the number of connected active

tunnels.

- Advanced feature, please click the button on the top right-hand corner to activate.

To enable Layer 2 Bridging between PepVPN profiles, navigate to Network>LAN>*LAN Profile Name*

8.41

WAN Connection Priority

https://www.peplink.com