User's Manual

11.2 LAN

11.2.1 Network Settings

LAN interface settings are located at Network>LAN>Network Settings. Navigating to that page will

show the following dashboard:

This represents the LAN interfaces that are active on your router (including VLAN). A grey “X” means that

the VLAN is used in other settings and cannot be deleted. You can find which settings are using the VLAN

by hovering over the grey “X”.

Alternatively, a red “X” means that there are no settings using the VLAN. You can delete that VLAN by

clicking the red “X”

Clicking on any of the existing LAN interfaces (or creating a new one) will show the following :

IP Settings

IP Address

The IP address and subnet mask of the Pepwave router on the LAN.

Network Settings

Name

Enter a name for the LAN.

VLAN ID

Enter a number for your VLAN.

https://www.peplink.com