User's Manual

To define the threshold manually using specific signal strength values, please click on the question Mark

and the following field will be visible.

WAN Connection Settings (USB)

WAN Connection Settings

WAN

Connection

Name

Indicate a name you wish to give this WAN connection

Enable

This setting enables the WAN connection. If schedules have been defined, you will be able

to select a schedule to apply to the connection.

DNS Server

Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the

DNS (Domain Name System) servers to be used when a DNS lookup is routed through this

connection.

Selecting Obtain DNS server address automatically results in the DNS servers assigned

by the WAN DHCP server being used for outbound DNS lookups over the connection. (The

DNS servers are obtained along with the WAN IP address assigned by the DHCP server.)

When Use the following DNS server address(es) is selected, you may enter custom DNS

server addresses for this WAN connection into the DNS server 1 and DNS server 2 fields.

Connection

Priority

This option allows you to configure the WAN connection whether for normal daily usage or

as a backup connection only.

If Always-on is chosen, the WAN connection will be kept on continuously, regardless of the

https://www.peplink.com