User's Manual

If you are not using drop-in mode, select the connection method for the WAN connection(s) from the

following screen:

Depending on the selection of connection type, further configuration may be needed. For example,

PPPoE and static IP require additional settings for the selected WAN port. Please refer to Section 13,

Configuring the WAN Interface(s) for details on setting up DHCP, static IP, and PPPoE.

If Mobile Internet Connection is checked, the setup wizard will move on to Operator Settings.

If Custom Mobile Operator Settings is selected, APN parameters are required. Some service providers

may charge a fee for connecting to a different APN. Please consult your service provider for the correct

settings.

https://www.peplink.com