User's Manual

VPN

● Secure SpeedFusion

● SpeedFusion performance analyzer

● X.509 certificate support

● Bandwidth bonding and failover among selected WAN connections

● Ability to route traffic to a remote VPN peer

● Optional pre-shared key setting

● Layer 2 bridging

● Layer 2 Peer Isolation

● SpeedFusion

throughput, ping, and traceroute tests

● Built-in L2TP / PPTP / OpenVPN VPN server

● Authenticate L2TP / PPTP clients using RADIUS and LDAP servers

● Multi-Site PepVPN Profile

● IPsec VPN for network-to-network connections

● L2TP / PPTP and IPsec passthrough

● Simultaneous L2 & L3 VPN tunnel between the same pair of devices

Inbound Trafﬁc Management

● TCP/UDP traffic redirection to dedicated LAN server(s)

● Inbound link load balancing by means of DNS

Outbound Policy

● Link load distribution per TCP/UDP service

● Persistent routing for specified source and/or destination IP addresses per TCP/UDP service

● Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms

● Time-based scheduling

AP Controller

● Configure and manage Pepwave AP devices

● Review the status of connected AP

https://www.peplink.com