User's Manual

IP address for the domain name on the most appropriate healthy WAN connection. It can also act as a

generic DNS server for hosting “A”, “CNAME”, “MX”, “TXT” and “NS” records.

The settings for defining the DNS records to be hosted by the Peplink Balance are located at

Network>Inbound Access>DNS Settings.

DNS Settings

DNS Servers

This setting specifies the WAN IP addresses on which the DNS server of the Peplink

Balance should listen.

If no addresses are selected, the inbound link load balancing feature will be disabled and

the Peplink Balance will not respond to DNS requests.

To specify and/or modify the IP addresses on which the DNS server should listen, click the

button that corresponds to DNS Server, and a selection screen will be displayed:

To specify the Internet IP addresses on which the DNS server should listen, select the

desired WAN connection then select the desired associated IP addresses. (Multiple items in

the list can be selected by holding CTRL and clicking on the items.)

Click Save to save the settings when configuration is complete.

Zone Transfer

This setting specifies the IP address(es) of the secondary DNS server(s)authorized to

retrieve zone records from the DNS server of the Peplink Balance.

https://www.peplink.com

115