User's Manual

11.5.2 Services

Services are defined at Network>Inbound Access>Services.

Tip

At least one server must be defined before services can be added.

To define a new service, click the Add Service button, upon which the following menu appears:

Services Settings

Enable

This setting specifies whether the inbound service rule takes effect.

When Yes is selected, the inbound service rule takes effect. If the inbound traffic matches the

specified IP protocol and port, action will be taken by the Peplink Balance based on the other

parameters of the rule.

When No is selected, the inbound service rule does not take effect. The Peplink Balance will

https://www.peplink.com

112